ATEIS DIVA8G2 - Manual (Page 20)

DIVA system 20
© 2012 ATEÏS
the front panel.
Click on Edit, for Music1 and Music2, in order to set event's parameters
Define the priority from 0 to 20, default is 20. Note: 0 is the highest priority. Here music
has been set to 13.
The event "Play Music" is created automatically as soon as you configure you music
source.
Figure 12: Music Source w indow
In the "Advance Setting" page, tick the "Pre-define Zone Enable". Then are able to define
the zone where music will be played, here zone 1, 2, 3.
Note: you cannot define different zone for the two music sources.
Click the OK button.