ATEIS DIVA8G2 - Manual (Page 205)

System Functionality 205
© 2012 ATEÏS
In this window you can enable DHCP by ticking the corresponding check box
Enter the IP address value
Enter the Subnet Mask value
Enter the Gateway value
Click OK
If not already logged in, it will prompt you to enter an username and password
System will reboot automatically
Note: you have to keep in mind that setting TCP/IP parameters not related to the one set for your
network card, could lead to communication problems.
5.5.2 Verify Diva Versions
Before checking the DIVAs firmware versions, you should connect to the machine trough TCP/IP, see
How to Search Device chapter.
In order to verify that the current software correspond to the DIVAs' units firmware, please follow the next
steps:
Go in the menu "Help"
choose "Version"
Then the following window should pop up: