ATEIS DIVA8G2 - Manual (Page 177)

System Functionality 177
© 2012 ATEÏS
5.2.13 Use Output Relay
In some event windows of DIVA software, you will have the possibility to set an action for output relay
and/or to enable busy relay or acknowledgement relay. Referring to the picture below, the upper squares
are for output relay activation and the lower squares for acknowledgement and busy relay states.
Note: DIVA Master and Slave offer 8 output relay each. Keep in mind that one relay can only rely to one
action. Multiple activation of output relay is not possible.
Acknowledge Relay
The purpose of the Acknowledge relay is to indicate to persons that the event is active. Trying to call in a
zone where a higher priority event is active will result in a refusal of that call in this zone. The
acknowledge relays will keep you aware of that by being not active.
The acknowledge relay can be set in all event setting window, follow the next steps to activate and set
an acknowledge relay.
Tick the check box in order to enable the acknowledge relay option.
Select on each device (master and/or slaves) the output channel that will be used as acknowledge
relay contact. Note: multiple output channel can be selected for an event.
Busy Relays