ATEIS DIVA8G2 - Manual (Page 172)

DIVA system 172
© 2012 ATEÏS
5.2.11.3 External Fault Inputs
As explained before, the External fault Inputs have been implemented in order to offer the possibility to
force DIVA to enter his security mode. For more information about security mode, please read
this.
The external trigger of those inputs should come from security devices such as security power supply.
You can also use those input to force DIVA into the security mode in order to save energy during night.
Like any of the logic inputs, you can associate an event to External Fault Inputs.
Name: Here you can specify a name by simply clicking in the box.
Normally Close/Open: Here you can specify the behaviour of the inputs. Normally closed
means that the contact is closed in neutral position and reciprocally normally open means that
the contact is open in neutral position.
Event Setting: By clicking start you will be able to associate an event to this input.
5.2.12 Do Phase Evacuation
Using the Evac configuration setup allows you to easily designed phase evacuation or any evacuation
scheme. To access the Evac Configuration matrix, please go in the menu View -> Evac Configuration.
The Evac configuration window should pop up.