ATEIS DIVA8G2 - Manual (Page 208)

DIVA system 208
© 2012 ATEÏS
5.5.3.1 Update Master Unit
Open: Here you can specify the path of the MCU update file. By default, the path specified
correspond to the software release version.
CRC: Displays the CRC check code corresponding to the firmware. This CRC code can be
compared to the one that can be read from the front panel.
Update: Will start the update process.
Close: Closes the window.
Timeline display: Shows the update process progression.
General Display: Displays the update information.