Device management, Search and settings, Set computer network parameters – ATEIS DIVA8G2 User Manual
Page 196: 5 device management
DIVA system
196
© 2012 ATEÏS
o
click OK.
o
enter the next letter or number repeating the same procedure
o
Once you have enter the right user name, press once the down arrow key to find "APL".
Press OK, this will validate you entry.
o
DIVA will ask to enter your password, repeat the same procedure to enter password.
From software:
You will be automatically login after first store, update, network options change, ethernet
settings change.
Effectively, DIVA software will ask you to enter a valid user name and password and will
remember your username and password until you exit or logout of the current configuration file.
To log out, go to the menu User -> Logout.
Default User Name and Password are:
ATEIS4 and ATEIS4 (highest level)
ATEIS3 and ATEIS3
ATEIS2 and ATEIS2
ATEIS1 and ATEIS1 (lowest level)
Note1: Username and password entry are not case sensitive, they are always filled in capital letters.
Note2: In order to have to highest level control, please use the ATEIS4 default account.
Note3: Configuration won't be stored if no level 4 account exist.
5.5
Device Management
5.5.1
Search and Settings
5.5.1.1
Set Computer Network Parameters
Before attempting to connect to a DIVA through TCP/IP, make sure that your computer Ethernet
settings are corresponding to the one in DIVA. You have two possiblities to make them compatible,
either change manually
change the DIVA Ethernet settings
or adapt your computer Ethernet settings.
DIVA's default ethernet settings:
IP address: 192.168.100.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.100.1
To check and/or modify your computer network settings, follow the next steps:
This step by step procedure is only accurate for Windows XP.
From Start, go to Settings, then Control Panel.
From the Control Panel, double click Network Connections icon.