How to use peqs – ATEIS DIVA8G2 User Manual
Page 260
Advertising
DIVA system
260
© 2012 ATEÏS
For the low pass and high pass filter, you have access to the following settings: cutoff frequency
and gain.
By clicking on the Graphic button you will able to adjust the cutoff frequency and the gain directly
by moving the corresponding yellow cursor, see below.
5.8.1.2
PEQ
On both output channels and input sources, you can add peaking equalization. You can add a three
band PEQ on inputs and use up to seven bands PEQ on amplifier outputs.
Advertising