ATEIS DIVA8G2 - Manual (Page 241)

System Functionality 241
© 2012 ATEÏS
use that way. Once the option selected, you will have access to detection settings:
Threshold (dB): The threshold setting will set the trigger point for activation of the music source.
If the threshold is set to -10 dB, the music source activation will take place when the signal
received from that source will be over -10 dB.
Attack Time (ms): The Attack time can be understood like the amount of time that the signal
have to be over the threshold point before music source will be activated. A correct setting of the
attack time can avoid inopportune activation of the music source (peak signal activation). The
Attack time can be set from 0 ms to 5000 ms.
Release Time (ms): As opposed to the Attack time, the Release time is the amount of time for
which the signal have to stay under the threshold point before deactivation of the music sources.
A correct Release Time can avoid inopportune deactivation of the music source (blank in CD). The
release time can be set from 0 ms to 5000 ms.
Setting those parameter correctly needs some experience, so be careful and please test it to learn more
about the behaviour of this option.
Once your modulation detection parameters are adjusted, you have to edit the advance setting for the
music sources, please refer to the Use Music Source general chapter.
5.7.1.3 Use Music Source From PSS
The PSS microphone is able to operate on music sources. In order to do so, you have to define PSS
keys to suit your need. See
How To Use PSS Microphone to learn more about the PSS.
Note: Routing music from the PSS can only be operated if the music source mode is Route Key. PSS
keys, for music operations, can be set to different type using the drop-down menu, see below: