ATEIS DIVA8G2 - Manual (Page 36)

DIVA system 36
© 2012 ATEÏS
As an EN 54-16 security system, all DIVA components and peripherals are constantly monitored
(without music interruption). All incidents are recorded into a data file which can be consulted on the
DIVA display or on a PC.
Also any detected faults and alarm status are signalled by general fault and alarm output contacts. A
local loudspeaker enables selective listening to all the sources and the system’s output signals.
The setup of DIVA is realized through a PC computer and the PCDIVA configuration software (Windows
compatible). Access can be password-protected.
The routing and the level of the music sources can be controlled directly from the PSS microphone.
All these features make DIVA the ideal system for shopping malls, hotels, restaurants, museums and
many other public places.
DIVA8M is made of:
5 audio inputs (2 x line, 1x MIC/ line, 1 x PSS or PSM, 1 Fire Mic.).
Integrated and monitored Fireman microphone.
8 logic input contacts.
1000 W max power on each channel amplifier.
RS-232 serial interfacing for third party control (Modbus, Notifier, Vox@net network).
Ethernet port (RJ-45) TCP/IP based for computer management, for software configuration and/or to
enable IP paging.
9 alarm evacuation input contacts(with surveillance).
Eight speaker zone connectors split in A and B line.
PSS/PSM connector, RJ-45 connector to link PSS or PSM call-stations.
Master-Slave link, RJ-45 connector to create a master-slave DIVA system.
Backup power input for 24VDC power supply.
Application Example 1
High rise building with distributed sound for multi-zone paging: