ATEIS DIVA8G2 - Manual (Page 275)

System Functionality 275
© 2012 ATEÏS
5.9.2.3 Vox@net
How to set the RS232 port of DIVA to communicate with a Vox@net server/client or in a remote access
(modan protocol) configuration.
To access the RS232 port settings, click on the RS-232 Port1 or RS-232 Port2 tabs. As the
settings are the same for both ports, only one will be introduced.
Procedure:
On RS-232 Port 1, choose the Vox@Net protocol wit the protocol drop-down menu.
Select the 9600 as Baud Rate.
Data bit should be set to 8.
Stop bit should be set to 1.
Parity should be set to "Even Parity".
More information about the Vox@net protocol and how to use it with DIVA can be found in the
communication protocols chapter.
The serial port pinning information can be found in each connectors on back panel.
5.9.3 Put DIVA in Vox@net
The DIVA system can be used as a matrix in any Vox@Net system. It can also be used in a remote
access configuration using RS-232. DIVA acts as a "slave" unit in bot Vox@Net and Modan.
From a DIVA point of view, the Vox@net protocol and modan protocol are equivalent.