ATEIS DIVA8G2 - Manual (Page 256)

DIVA system 256
© 2012 ATEÏS
5.8.1 Filter
5.8.1.1 Hi/Lo Pass
On DIVA, you can add hi-pass or low-pass filtering on audio input and on amplifier outputs in order to
adjust the frequency range to your needs.
To do so, you have to access to the DSP Configuration window.
In the Master window, double-click on the DIVA icon. The DSP configuration window will pop up.
Note: if no audio sources have been set into the configuration, the corresponding Filter and
Compressor-Limiter location will display in gray.
On the left of the DSP Configuration window you can find all audio inputs and on the right amplifier
outputs.