ATEIS DIVA8G2 - Manual (Page 258)

DIVA system 258
© 2012 ATEÏS
o Graphic: By clicking on the Graphic button, you will enter the filter graphic edition
window, see below. By moving the blue point, you can adjust the cutoff frequency.
On Outputs
To add high or low pass filter on audio amplifier outputs, double click on the icon: PEQ Voice
Channel or PEQ Music Channel in the DSP Configuration Window. The following window pops up.
Note: more explanation about amplifier output PEQ can be found here.
The following window will pop-up:
Clicking on the EQ square, will call for the amplifier equalization page.