What's inside the box, Installation – ATEIS DIVA8G2 User Manual
Page 40
DIVA system
40
© 2012 ATEÏS
3x PSM-V2, paging console
1x Vox-Net OUTPUT Node license
4.1.1.2
What's inside the Box
Opening the box you should find the following items:
DIVA Master Unit
Rack rounting brackets, 2 pcs
Metal screws Philips M3x6, 6 pcs
12-way euroblock connectors, 1 pcs
10-way euroblock connectors, 3 pcs
5-way euroblock connectors, 2 pcs
4-way euroblock connector, 11 pcs
230V/24 VDC power supply
CD-ROM
Fireman Microphone
If you realize anything missing, please contact your distributor.
4.1.1.3
Installation
In the Box of the DIVA there is containing a letter with a point by point instruction that need to be
followed for safety reasons.
Rack mounting:
If needed, fit the rack mounting brackets to each side of the DIVA by using the 6 pcs Phillips M3x6
screws supplied with the package.
Sitting:
The DIVA unit takes a 2U 19’’ rack space and generates little heat itself. Consider leaving enough
ventilation space above and below the unit. Do not mount the DIVA directly above heat generating
devices like power supplies or power amplifiers.
Power connection:
DIVA accepts 24 VDC power supply as well as 230 VAC power supply. In order to be EN54
compliant, use a BECs battery charger and power supply and connect it on a 4-way euroblock
connector respecting the polarity.