ATEIS DIVA8G2 User Manual
Page 74
DIVA system
74
© 2012 ATEÏS
o
Press OK.
o
DIVA displays "TEST ENABLE 2 SURE? OK/ESC".
o
Press OK.
o
The message is played in the pre-defined zone(s).
Stopping message broadcasting
Reset the evacuation process.
o
Press the RESET button.
o
DIVA displays "RESET KEY PROCESS".
o
Press OK.
o
DIVA displays "RESET ENABLE 1 SURE? OK/ESC".
o
Press OK.
o
DIVA displays "RESET ENABLE 2 SURE? OK/ESC".
o
Press OK.
o
A software reset is applied. Any active trigger (fault, contact, etc) are restarted after the
software reset.
Stop ALERT or MSG TEST broadcasting.
o
Press the ALERT or MSG TEST button.
o
DIVA displays "ALERT or MSG TEST KEY PROCESS".
o
Press OK.
o
DIVA displays "ALERT or MSG TEST DISABLE 1 SURE? OK/ESC".
o
Press OK.
o
DIVA displays "ALERT or MSG TEST DISABLE 2 SURE? OK/ESC".
o
Press OK.
o
The message broadcasting is stopped.
Fireman Microphone
Depending on the software configuration created, there is two distinct way of starting a Fireman
microphone call:
with a manual zone selection or with pre-define zone(s) selection. To learn more on how to configure pre-
define zone selection fro the fireman microphone, please read the "how to use a fireman microphone"
chapter.
Starting a call with pre-define zone(s)
Press the fireman microphone contact to start speaking in the pre-defined zone(s), the
corresponding zone EVAC LED(s) are lit.