ATEIS DIVA8G2 - Manual (Page 30)

DIVA system 30
© 2012 ATEÏS
Figure 22:GPIO's Evacuation Inputs tab
Under Channel 1, tick the "Latch Mode" square selector. "Latch mode" defines way the
contact or button will work. In "Lach Mode", you will have to close/open the contact once for
launching the event, and reclose/reopen it to stop the event. In "Non Latch Mode" the contact
need to be close/opened all the time the event has to be activated.
Click on the "Start" under "Event Setting" for channel 1. You will enter in the "Events
Selection" page, see Figure 23.