Introduction to rstp, Introduction to mstp, Why mstp – H3C Technologies H3C S5120 Series Switches User Manual

Page 174: Weaknesses of stp and rstp, Features of mstp, 9 introduction to mstp

Advertising
background image

1-9

For this reason, as a mechanism for state transition in STP, the newly elected root ports or designated
ports require twice the forward delay time before transiting to the forwarding state to ensure that the new
configuration BPDU has propagated throughout the network.

z

Hello time is the time interval at which a device sends hello packets to the surrounding devices to
ensure that the paths are fault-free.

z

Max age is a parameter used to determine whether a configuration BPDU held by the device has
expired. A configuration BPDU beyond the max age will be discarded.

Introduction to RSTP

Developed based on the 802.1w standard of IEEE, RSTP is an optimized version of STP. It achieves
rapid network convergence by allowing a newly elected root port or designated port to enter the
forwarding state much quicker under certain conditions than in STP.

z

In RSTP, a newly elected root port can enter the forwarding state rapidly if this condition is met: the
old root port on the device has stopped forwarding data and the upstream designated port has
started forwarding data.

z

In RSTP, a newly elected designated port can enter the forwarding state rapidly if this condition is
met: the designated port is an edge port (a port directly connects to a user terminal rather than to
another device or a shared LAN segment) or a port connected with a point-to-point link. If the
designated port is an edge port, it can enter the forwarding state directly; if the designated port is
connected with a point-to-point link, it can enter the forwarding state immediately after the device
undergoes handshake with the downstream device and gets a response.

Introduction to MSTP

Why MSTP

Weaknesses of STP and RSTP

STP does not support rapid state transition of ports. A newly elected root port or designated port must
wait twice the forward delay time before transiting to the forwarding state, even if it is a port on a
point-to-point link or an edge port.

Although RSTP supports rapid network convergence, it has the same drawback as STP does: All
bridges within a LAN share the same spanning tree, so redundant links cannot be blocked based on
VLAN, and the packets of all VLANs are forwarded along the same spanning tree.

Features of MSTP

Developed based on IEEE 802.1s, MSTP overcomes the shortcomings of STP and RSTP. In addition to
the support for rapid network convergence, it allows data flows of different VLANs to be forwarded along
separate paths, thus providing a better load sharing mechanism for redundant links. For description
about VLANs, refer to VLAN Configuration in this manual.

MSTP features the following:

Advertising