H3C Technologies H3C S5120 Series Switches - Manual (Page 545)

1-7
Identifying pluggable transceivers
As pluggable transceivers are of various types and from different vendors, you can use the following
commands to view the key parameters of the pluggable transceivers, including transceiver type,
connector type, central wavelength of the laser sent, transfer distance and vendor name or name of the
vendor who customizes the transceivers to identify the pluggable transceivers.
Follow these steps to identify pluggable transceivers:
To do… Use the command… Remarks
Display key parameters of the
pluggable transceiver(s)
display transceiver
einterface [ interface-type
interface-number ]
Available for all pluggable
transceivers.
Display part of the electrical
label information of the
anti-spoofing transceiver(s)
customized by H3C
display transceiver manuinfo
interface [ interface-type
interface-number ] Available for anti-spoofing
pluggable transceiver(s)
customized by H3C only.
z You can use the Vendor Name field in the prompt information of the display transceiver
command to identify an anti-spoofing pluggable transceiver customized by H3C. If the field is H3C,
it is considered an H3C-customized pluggable transceiver.
z Electrical label information is also called permanent configuration data or archive information,
which is written to the storage component of a transceiver during device debugging or testing. The
information includes name of the transceiver, device serial number, and vendor name or name of
the vendor who customizes the transceiver.
Diagnosing pluggable transceivers
The system outputs alarm information for you to diagnose and troubleshoot faults of pluggable
transceivers. Optical transceivers customized by H3C also support the digital diagnosis function, which
monitors the key parameters of a transceiver, such as temperature, voltage, laser bias current, TX
power, and RX power. When these parameters are abnormal, you can take corresponding measures to
prevent transceiver faults.
Follow these steps to diagnose pluggable transceivers:
To do… Use the command… Remarks
Display the current alarm
information of the pluggable
transceiver(s) display transceiver alarm
interface [ interface-type
interface-number ]
Available for all pluggable
transceivers.
Display the currently measured
value of the digital diagnosis
parameters of the anti-spoofing
optical transceiver(s)
customized by H3C
display transceiver
diagnosis interface
[ interface-type
interface-number ]
Available for anti-spoofing
pluggable optical transceiver(s)
customized by H3C only.
Displaying and Maintaining Device Management Configuration
To do… Use the command… Remarks
Display information of the boot
file
display boot-loader Available in any view