H3C Technologies H3C S5120 Series Switches - Manual (Page 702)

2-4
To do… Use the command… Remarks
Enter system view system-view —
Configure the port number of
the HTTPS service
ip https port port-number
Optional
By default, the port number of
the HTTPS service is 443.
If you execute the ip https port command for multiple times, the last configured port number is used.
Associating the HTTPS Service with an ACL
Associating the HTTPS service with an ACL can filter out requests from some clients to let pass only
clients that pass the ACL filtering.
Follow these steps to associate the HTTPS service with an ACL:
To do… Use the command… Remarks
Enter system view system-view —
Associate the HTTPS service
with an ACL
ip https acl acl-number
Required
Not associated by default.
z If you execute the ip https acl command for multiple times to associate the HTTPS service with
different ACLs, the HTTPS service is only associated with the last specified ACL.
z For the detailed introduction to ACL, refer to ACL Configuration.
Displaying and Maintaining HTTPS
To do… Use the command… Remarks
Display information about
HTTPS
display ip https Available in any view
HTTPS Configuration Example
Network requirements
Users can access and control the device through logging in to the Web page. To prevent unauthorized
users from accessing and controlling the device and enhance the device management security, the