H3C Technologies H3C S5120 Series Switches - Manual (Page 43)

2-4
Configuration Description
AUX user
interface
configuration
Configure the command
level available to the
users logging in to the
AUX user interface
Optional
By default, commands of level 3 are available to the
users logging in to the AUX user interface.
Define a shortcut key for
aborting tasks
Optional
The default shortcut key combination for aborting
tasks is < Ctrl + C >.
Define a shortcut key for
starting terminal sessions
Optional
By default, pressing Enter key starts the terminal
session.
Make terminal services
available
Optional
By default, terminal services are available in all user
interfaces
Set the maximum number
of lines the screen can
contain
Optional
By default, the screen can contain up to 24 lines.
Set history command
buffer size
Optional
By default, the history command buffer can contain
up to 10 commands.
Terminal
configuration
Set the timeout time of a
user interface
Optional
The default timeout time is 10 minutes.
Changing of Console port configuration terminates the connection to the Console port. To establish the
connection again, you need to modify the configuration of the termination emulation utility running on
your PC accordingly. Refer to Setting Up the Connection to the Console Port for details.
Console Port Login Configurations for Different Authentication Modes
Table 2-3 lists Console port login configurations for different authentication modes.
Table 2-3 Console port login configurations for different authentication modes
Authentication
mode
Console port login configuration Description
None
Perform
common
configuration Perform common
configuration for
Console port login Optional
Refer to Common Configuration for
details.
Configure the
password
Configure the
password for local
authentication
Required
Password
Perform
common
configuration Perform common
configuration for
Console port login Optional
Refer to Common Configuration for
details.