H3C Technologies H3C S5120 Series Switches - Manual (Page 416)

1-10
For the NAS, each user belongs to an ISP domain. Up to 16 ISP domains can be configured on a NAS.
If a user does not provide the ISP domain name, the system considers that the user belongs to the
default ISP domain.
Follow these steps to create an ISP domain:
To do… Use the command… Remarks
Enter system view system-view —
Create an ISP domain and
enter ISP domain view
domain isp-name Required
Return to system view quit —
Specify the default ISP domain
domain default enable
isp-name
Optional
By default, the system has a
default ISP domain named
system.
z You cannot delete the default ISP domain unless you change it to a non-default ISP domain (with
the domain default disable command) first.
z If a user enters a username without an ISP domain name, the device uses the authentication
method configured for the default ISP domain to authenticate the user.
Configuring ISP Domain Attributes
Follow these steps to configure ISP domain attributes:
To do… Use the command… Remarks
Enter system view system-view —
Enter ISP domain view domain isp-name —
Place the ISP domain to the
state of active or blocked
state { active | block }
Optional
When created, an ISP domain
is in the active state by default,
and users in the domain can
request network services.
Specify the maximum number
of active users in the ISP
domain
access-limit enable
max-user-number Optional
No limit by default
Configure the idle cut function idle-cut enable minute [ flow ]
Optional
Disabled by default
Currently, this command is
effective only for LAN users.
Configure the self-service
server localization function self-service-url enable
url-string Optional
Disabled by default