Configuring basic functions of igmp snooping, Configuration prerequisites, Enabling igmp snooping – H3C Technologies H3C S5120 Series Switches User Manual

Page 312

Advertising
background image

2-7

Task

Remarks

Proxying

Configuring a Source IP Address for the IGMP
Messages Sent by the Proxy

Optional

Configuring a Multicast Group Filter

Optional

Configuring the Function of Dropping Unknown
Multicast Data

Optional

Configuring IGMP Report Suppression

Optional

Configuring Maximum Multicast Groups that Can
Be Joined on a Port

Optional

Configuring 802.1p Precedence for IGMP
Messages

Optional

Configuring an IGMP
Snooping Policy

Configuring Multicast Group Replacement

Optional

z

Configurations made in IGMP snooping view are effective for all VLANs, while configurations made

in VLAN view are effective only for ports belonging to the current VLAN. For a given VLAN, a

configuration made in IGMP snooping view is effective only if the same configuration is not made in

VLAN view.

z

Configurations made in IGMP snooping view are effective for all ports; configurations made in

Ethernet interface view are effective only for the current port; configurations made in Layer 2

aggregate interface view are effect only for the current interface; configurations made in port group

view are effective only for all the ports in the current port group. For a given port, a configuration

made in IGMP snooping view is effective only if the same configuration is not made in Ethernet

interface view, Layer 2 aggregate interface view or port group view.

z

For IGMP snooping, configurations made on a Layer 2 aggregate interface do not interfere with

configurations made on its member ports, nor do they take part in aggregation calculations;

configurations made on a member port of the aggregate group will not take effect until it leaves the

aggregate group.

Configuring Basic Functions of IGMP Snooping

Configuration Prerequisites

Before configuring the basic functions of IGMP snooping, complete the following task:

z

Configure the corresponding VLANs.

Before configuring the basic functions of IGMP snooping, prepare the following data:

z

Version of IGMP snooping.

Enabling IGMP Snooping

Follow these steps to enable IGMP snooping:

Advertising