H3C Technologies H3C SR8800 User Manual
Page 190
174
3.
Verify the configuration:
# Display the IS-IS LSDB information of each router.
[RouterA] display isis lsdb
Database information for ISIS(1)
--------------------------------
Level-1 Link State Database
LSPID Seq Num Checksum Holdtime Length ATT/P/OL
--------------------------------------------------------------------------
0000.0000.0001.00-00* 0x0000000d 0xb184 879 68 0/0/0
0000.0000.0002.00-00 0x0000000c 0xcf65 493 68 0/0/0
0000.0000.0003.00-00 0x00000013 0x2f38 594 111 1/0/0
*-Self LSP, +-Self LSP(Extended), ATT-Attached, P-Partition, OL-Overload
[RouterB] display isis lsdb
Database information for ISIS(1)
--------------------------------
Level-1 Link State Database
LSPID Seq Num Checksum Holdtime Length ATT/P/OL
--------------------------------------------------------------------------
0000.0000.0001.00-00 0x0000000d 0xb184 707 68 0/0/0
0000.0000.0002.00-00* 0x0000000c 0xcd66 1167 68 0/0/0
0000.0000.0003.00-00 0x00000013 0x2d39 1136 111 1/0/0
*-Self LSP, +-Self LSP(Extended), ATT-Attached, P-Partition, OL-Overload
[RouterC] display isis lsdb
Database information for ISIS(1)
--------------------------------
Level-1 Link State Database
LSPID Seq Num Checksum Holdtime Length ATT/P/OL
------------------------------------------------------------------------
0000.0000.0001.00-00 0x0000000d 0xc57a 991 68 0/0/0
0000.0000.0002.00-00 0x0000000c 0xef4d 1025 68 0/0/0
0000.0000.0003.00-00* 0x00000013 0x93dd 1026 111 1/0/0
*-Self LSP, +-Self LSP(Extended), ATT-Attached, P-Partition, OL-Overload