H3C Technologies H3C SR8800 - Manual (Page 310)

294
[RouterC-ipsec-policy-manual-policy001-10] quit
4. Apply the IPsec policies in the RIPng process:
# Configure Router A.
[RouterA] ripng 1
[RouterA-ripng-1] enable ipsec-policy policy001
[RouterA-ripng-1] quit
# Configure Router B.
[RouterB] ripng 1
[RouterB-ripng-1] enable ipsec-policy policy001
[RouterB-ripng-1] quit
# Configure Router C.
[RouterC] ripng 1
[RouterC-ripng-1] enable ipsec-policy policy001
[RouterC-ripng-1] quit
5. Verify the configuration:
RIPng traffic between Routers A, B and C is protected by IPsec.