Configuration procedure – H3C Technologies H3C SR8800 User Manual
Page 384
368
Figure 118 Network diagram
Configuration procedure
1.
Configure IPv6 addresses for interfaces. (Details not shown)
2.
Configure IBGP connections:
# Configure Router B.
<RouterB> system-view
[RouterB] ipv6
[RouterB] bgp 65009
[RouterB-bgp] router-id 2.2.2.2
[RouterB-bgp] ipv6-family
[RouterB-bgp-af-ipv6] peer 9:1::2 as-number 65009
[RouterB-bgp-af-ipv6] peer 9:3::2 as-number 65009
[RouterB-bgp-af-ipv6] quit
[RouterB-bgp] quit
# Configure Router C.
<RouterC> system-view
[RouterC] ipv6
[RouterC] bgp 65009
[RouterC-bgp] router-id 3.3.3.3
[RouterC-bgp] ipv6-family
[RouterC-bgp-af-ipv6] peer 9:3::1 as-number 65009
[RouterC-bgp-af-ipv6] peer 9:2::2 as-number 65009
[RouterC-bgp-af-ipv6] quit
[RouterC-bgp] quit
# Configure Router D.
<RouterD> system-view
[RouterD] ipv6
[RouterD] bgp 65009
[RouterD-bgp] router-id 4.4.4.4
[RouterD-bgp] ipv6-family
[RouterD-bgp-af-ipv6] peer 9:1::1 as-number 65009
[RouterD-bgp-af-ipv6] peer 9:2::1 as-number 65009
[RouterD-bgp-af-ipv6] quit
[RouterD-bgp] quit
3.
Configure the EBGP connection:
# Configure Router A.