H3C Technologies H3C SR8800 User Manual

Page 72

Advertising
background image

56

[RouterC-rip-1] network 192.168.3.0

[RouterC-rip-1] network 192.168.4.0

[RouterC-rip-1] quit

2.

Configure IP addresses and BFD parameters for the interfaces:
# Configure Router A.

[RouterA] bfd session init-mode active

[RouterA] interface GigabitEthernet 4/1/1

[RouterA-GigabitEthernet4/1/1] ip address 192.168.3.1 24

[RouterA-GigabitEthernet4/1/1] quit

[RouterA] interface GigabitEthernet 4/1/2

[RouterA-GigabitEthernet4/1/2] ip address 192.168.1.1 24

[RouterA-GigabitEthernet4/1/2] bfd min-transmit-interval 500

[RouterA-GigabitEthernet4/1/2] bfd min-receive-interval 500

[RouterA-GigabitEthernet4/1/2] bfd detect-multiplier 7

[RouterA-GigabitEthernet4/1/2] quit

# Configure Router B.

<RouterB> system-view

[RouterB] interface GigabitEthernet 4/1/2

[RouterB-GigabitEthernet4/1/2] ip address 192.168.1.2 24

[RouterB-GigabitEthernet4/1/2] quit

[RouterB] interface GigabitEthernet 4/1/1

[RouterB-GigabitEthernet4/1/1] ip address 192.168.2.1 24

# Configure Router C.

[RouterC] bfd session init-mode active

[RouterC] interface GigabitEthernet 4/1/1

[RouterC-GigabitEthernet4/1/1] ip address 192.168.2.2 24

[RouterC-GigabitEthernet4/1/1] bfd min-transmit-interval 500

[RouterC-GigabitEthernet4/1/1] bfd min-receive-interval 500

[RouterC-GigabitEthernet4/1/1] bfd detect-multiplier 6

[RouterC-GigabitEthernet4/1/1] quit

[RouterC] interface GigabitEthernet 4/1/2

[RouterC-GigabitEthernet4/1/2] ip address 192.168.4.2 24

[RouterC-GigabitEthernet4/1/2] quit

# Configure Router D.

<RouterD> system-view

[RouterD] interface GigabitEthernet 4/1/2

[RouterD-GigabitEthernet4/1/2] ip address 192.168.4.1 24

[RouterD-GigabitEthernet4/1/2] quit

[RouterD] interface GigabitEthernet 4/1/1

[RouterD-GigabitEthernet4/1/1] ip address 192.168.3.2 24

[RouterD-GigabitEthernet4/1/1] quit

3.

Configure static routes:
# Configure a static route to Router C on Router A.

[RouterA] ip route-static 192.168.2.0 24 GigabitEthernet4/1/2 192.168.1.2

[RouterA] ip route-static 101.1.1.1 24 null 0

[RouterA] quit

# Configure a static route to Router A on Router C.

Advertising
This manual is related to the following products:

H3C SR6600-X, H3C SR6600, H3C WX6000 Series Access Controllers, H3C WX5000 Series Access Controllers, H3C WX3000 Series Unified Switches, H3C LSWM1WCM10 Access Controller Module, H3C LSWM1WCM20 Access Controller Module, H3C LSQM1WCMB0 Access Controller Module, H3C LSRM1WCM2A1 Access Controller Module, H3C LSBM1WCM2A0 Access Controller Module

Popular Brands
Popular manuals