H3C Technologies H3C SR8800 User Manual
Page 333
317
[RouterD] ipv6
[RouterD] ospfv3
[RouterD-ospfv3-1] router-id 4.4.4.4
[RouterD-ospfv3-1] quit
[RouterD] interface GigabitEthernet 1/1/1
[RouterD-GigabitEthernet1/1/1] ospfv3 1 area 0
[RouterD-GigabitEthernet1/1/1] quit
# Display neighbor information on Router A. You can find routers have the same default DR priority
1. Then, Router D (the router with the highest Router ID) is elected as the DR, and Router C is the
BDR.
[RouterA] display ospfv3 peer
OSPFv3 Area ID 0.0.0.0 (Process 1)
----------------------------------------------------------------------
Neighbor ID Pri State Dead Time Interface Instance ID
2.2.2.2 1 2-Way/DROther 00:00:36 GE1/1/1 0
3.3.3.3 1 Full/Backup 00:00:35 GE1/1/1 0
4.4.4.4 1 Full/DR 00:00:33 GE1/1/1 0
# Display neighbor information on Router D. You can find the neighbor states of Router D are all
full.
[RouterD] display ospfv3 peer
OSPFv3 Area ID 0.0.0.0 (Process 1)
----------------------------------------------------------------------
Neighbor ID Pri State Dead Time Interface Instance ID
1.1.1.1 1 Full/DROther 00:00:30 GE1/1/1 0
2.2.2.2 1 Full/DROther 00:00:37 GE1/1/1 0
3.3.3.3 1 Full/Backup 00:00:31 GE1/1/1 0
3.
Configure DR priorities for interfaces:
# Configure the DR priority of GigabitEthernet 1/1/1 of Router A as 100.
[RouterA] interface GigabitEthernet 1/1/1
[RouterA-GigabitEthernet1/1/1] ospfv3 dr-priority 100
[RouterA-GigabitEthernet1/1/1] quit
# Configure the DR priority of GigabitEthernet 1/1/1 as 0 on Router B.
[RouterB] interface GigabitEthernet 1/1/1
[RouterB-GigabitEthernet1/1/1] ospfv3 dr-priority 0
[RouterB-GigabitEthernet1/1/1] quit
# Configure the DR priority of GigabitEthernet 1/1/1 as 2 on Router C.
[RouterC] interface GigabitEthernet 1/1/1
[RouterC-GigabitEthernet1/1/1] ospfv3 dr-priority 2
[RouterC-GigabitEthernet1/1/1] quit
# Display neighbor information on Router A. You can find DR priorities have been updated, but the
DR and BDR are not changed.
[RouterA] display ospfv3 peer
OSPFv3 Area ID 0.0.0.0 (Process 1)
----------------------------------------------------------------------
Neighbor ID Pri State Dead Time Interface Instance ID
2.2.2.2 0 2-Way/DROther 00:00:38 GE1/1/1 0
3.3.3.3 2 Full/Backup 00:00:32 GE1/1/1 0