H3C Technologies H3C SR8800 User Manual

Page 343

Advertising

327

[RouterA] ospfv3 1

[RouterA-ospfv3-1] router-id 1.1.1.1

[RouterA-ospfv3-1] quit

[RouterA] interface GigabitEthernet 3/1/2

[RouterA-GigabitEthernet3/1/2] ospfv3 1 area 1

[RouterA-GigabitEthernet3/1/2] quit

# Configure Router B: enable OSPFv3 and configure the Router ID as 2.2.2.2.

<RouterB> system-view

[RouterB] ipv6

[RouterB] ospfv3 1

[RouterB-ospfv3-1] router-id 2.2.2.2

[RouterB-ospfv3-1] quit

[RouterB] interface GigabitEthernet 3/1/2

[RouterB-GigabitEthernet3/1/2] ospfv3 1 area 1

[RouterB-GigabitEthernet3/1/2] quit

[RouterB] interface GigabitEthernet 3/1/1

[RouterB-GigabitEthernet3/1/1] ospfv3 1 area 0

[RouterB-GigabitEthernet3/1/1] quit

# Configure Router C: enable OSPFv3 and configure the Router ID as 3.3.3.3.

<RouterC> system-view

[RouterC] ipv6

[RouterC] ospfv3 1

[RouterC-ospfv3-1] router-id 3.3.3.3

[RouterC-ospfv3-1] quit

[RouterC] interface GigabitEthernet 3/1/1

[RouterC-GigabitEthernet3/1/1] ospfv3 1 area 0

[RouterC-GigabitEthernet3/1/1] quit

Configure OSPFv3 IPsec policies:
# On Router A, create an IPsec proposal named tran1, and set the encapsulation mode to
transport mode, the security protocol to ESP, the encryption algorithm to DES, and authentication

algorithm to SHA1; create an IPsec policy named policy001, specify the manual mode for it,

reference IPsec proposal tran1, set the SPIs of the inbound and outbound SAs to 12345, and the
keys for the inbound and outbound SAs using ESP to abcdefg.

[RouterA] ipsec proposal tran1

[RouterA-ipsec-proposal-tran1] encapsulation-mode transport

[RouterA-ipsec-proposal-tran1] transform esp

[RouterA-ipsec-proposal-tran1] esp encryption-algorithm des

[RouterA-ipsec-proposal-tran1] esp authentication-algorithm sha1

[RouterA-ipsec-proposal-tran1] quit

[RouterA] ipsec policy policy001 10 manual

[RouterA-ipsec-policy-manual-policy001-10] proposal tran1

[RouterA-ipsec-policy-manual-policy001-10] sa spi outbound esp 12345

[RouterA-ipsec-policy-manual-policy001-10] sa spi inbound esp 12345

[RouterA-ipsec-policy-manual-policy001-10] sa string-key outbound esp abcdefg

[RouterA-ipsec-policy-manual-policy001-10] sa string-key inbound esp abcdefg

[RouterA-ipsec-policy-manual-policy001-10] quit

# On Router B, create an IPsec proposal named tran1, and set the encapsulation mode to transport
mode, the security protocol to ESP, the encryption algorithm to DES, and authentication algorithm

Advertising

This manual is related to the following products:

H3C SR6600-X, H3C SR6600, H3C WX6000 Series Access Controllers, H3C WX5000 Series Access Controllers, H3C WX3000 Series Unified Switches, H3C LSWM1WCM10 Access Controller Module, H3C LSWM1WCM20 Access Controller Module, H3C LSQM1WCMB0 Access Controller Module, H3C LSRM1WCM2A1 Access Controller Module, H3C LSBM1WCM2A0 Access Controller Module

Popular Brands

Popular manuals