Configuring ospfv3 gr, Network requirements – H3C Technologies H3C SR8800 User Manual
Page 337
321
NextHop : ::1 Preference: 0
Interface : InLoop0 Cost : 0
Destination: 1::/64 Protocol : OSPFv3
NextHop : FE80::200:CFF:FE01:1C03 Preference: 150
Interface : GE3/1/2 Cost : 3
Destination: 2::/64 Protocol : OSPFv3
NextHop : FE80::200:CFF:FE01:1C03 Preference: 150
Interface : GE3/1/2 Cost : 3
Destination: 3::/64 Protocol : Direct
NextHop : 3::2 Preference: 0
Interface : GE3/1/2 Cost : 0
Destination: 3::2/128 Protocol : Direct
NextHop : ::1 Preference: 0
Interface : InLoop0 Cost : 0
Destination: 4::/64 Protocol : Direct
NextHop : 4::1 Preference: 0
Interface : GE3/1/1 Cost : 0
Destination: 4::1/128 Protocol : Direct
NextHop : ::1 Preference: 0
Interface : InLoop0 Cost : 0
Destination: FE80::/10 Protocol : Direct
NextHop : :: Preference: 0
Interface : NULL0 Cost : 0
Configuring OSPFv3 GR
Network requirements
•
As shown in
, Router A, Router B and Router C that belong to the same AS and the same
OSPFv3 routing domain are GR capable.
•
Router A acts as the GR Restarter. Router B and Router C are the GR Helpers and synchronize their
LSDBs with Router A through out-of-band (OOB) communication of GR.