H3C Technologies H3C SR8800 - Manual (Page 248)

232
Step Command
1. Enter system view. system-view
2. Enter BGP view. bgp as-number
3. Create an EBGP peer group. group group-name external
4. Specify the AS number for the group. peer group-name as-number as-number
5. Add the peer into the group. peer ip-address group group-name
NOTE:
•
Do not specify any AS number for a peer before adding it into the peer group.
• All the added peers have the same AS number as that of the peer group.
To configure an EBGP peer group using the second approach:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter BGP view. bgp as-number N/A
3. Create an EBGP peer group. group group-name external N/A
4. Specify an AS number for a
peer. peer ip-address as-number
as-number
N/A
5. Add the peer into the group.
peer ip-address group
group-name [ as-number
as-number ]
The AS number can be either
specified or not specified in the
command. If specified, the AS
number must be the same as that
specified for the peer with the peer
ip-address as-number as-number
command.
NOTE:
Peers added in the group can have different AS numbers.
To configure an EBGP peer group using the third approach:
Step Command
1. Enter system view. system-view
2. Enter BGP view. bgp as-number
3. Create an EBGP peer group. group group-name external
4. Add a peer into the group
and specify its AS number.
peer ip-address group group-name as-number as-number
NOTE:
•
Do not specify any AS number for a peer before adding it into the peer group.
• Peers added in the group can have different AS numbers.