H3C Technologies H3C SR8800 User Manual
Page 416
400
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter routing policy view.
route-policy route-policy-name
{ deny | permit } node node-number Not created by default.
3.
Set the AS-PATH attribute for
BGP routing information.
apply as-path as-number&<1-10>
[ replace ]
Optional.
Not set by default.
4.
Delete the community attribute
of BGP routing information
using the community list.
apply comm-list { comm-list-number
| comm-list-name } delete
Optional.
Not configured by default.
5.
Set the community attribute for
BGP routing information.
apply community { none | additive
| { community-number&<1-16> |
aa:nn&<1-16> | internet |
no-advertise | no-export |
no-export-subconfed } *
[ additive ] }
Optional.
Not set by default.
6.
Set a cost for routing
information.
apply cost [ + | - ] value
Optional.
Not set by default.
7.
Set a cost type for routing
information.
apply cost-type [ external | internal
| type-1 | type-2 ]
Optional.
Not set by default.
8.
Set the extended community
attribute for BGP routing.
apply extcommunity { rt
{ as-number:nn |
ip-address:nn } }&<1-16>
[ additive ]
Optional
Not set by default.
9.
Set the next hop.
•
Set the next hop for IPv4 routes:
apply ip-address next-hop
ip-address
•
Set the next hop for IPv6 routes:
apply ipv6 next-hop
ipv6-address
Optional.
Not set by default.
The setting does not apply to
redistributed routing information.
10.
Inject routing information to a
specified ISIS level.
apply isis { level-1 | level-1-2 |
level-2 }
Optional.
Not configured by default.
11.
Set the local preference for
BGP routing information.
apply local-preference preference
Optional.
Not set by default.
12.
Set MPLS label.
apply mpls-label
Optional.
Not set by default.
13.
Set the origin attribute for BGP
routing information.
apply origin { egp as-number | igp
| incomplete }
Optional
Not set by default.
14.
Set the preference for the
routing protocol.
apply preference preference
Optional.
Not set by default.
15.
Set a preferred value for BGP
routing information.
apply preferred-value
preferred-value
Optional.
Not set by default.