Honeywell DCP552 Mark II - Manual (Page 13)

1 - 3 Data Configuration Overview
Data is comprised of parameters and the program.
Parameters are used to set the functions of the DCP552 while the program is the software that operates the
controller at run time.
● A total of 49 patterns
It will store up to 49 programs per channel (CH1 and CH2), with up to 99
segments per program.
● Parameters
Five types of patterns are provided: variable parameters, event configuration data,
PID parameters, setup data and constant value control data.
1-3
Chapter 1. PRODUCT OUTLINE
Program number = 49 Segment count = 8
SP
Time
Program number = 2 Segment count = 15
Time
Program number = 1 Segment count = 19
Time
Program number = 1 Segment count = 6
SP
Time
For CH1
For CH2
For CH2
For CH1
(1)
(2)
(3)
(4)
(5)
(6)
(18)
(19)
(13)
(14)
(15)
(2)
(3)
(4)
(5)
(6) (7)
(8)
Variable parameter
Event configuration data
PID parameter (CH1)
PID parameter (CH2)
Setup data
Constant value control data (CH1)
Constant value control data (CH2)