Performing a hotsync, Operation between, Operation between your – Sony PEG-T415G User Manual
Page 194: Using data of another sony clié handheld
194
Chapter6
Additional information
Performing a HotSync
®
operation between your old CLIÉ
handheld and the new Palm Desktop for CLIÉ software
If you already own a CLIÉ handheld before this model (PEG-T615C/G or
PEG-T415/G), you can perform a HotSync operation between that CLIÉ
handheld (PEG-S300/HK, PEG-S300/SP or PEG-N710C/G) and the Palm
Desktop for CLIÉ software supplied to this model.
After setting up your CLIÉ handheld as indicated in the Read This First
manual, perform the HotSync operation as indicated on page 102.
If you have any trouble with the HotSync operation, perform the following.
• Check the Windows task tray to make sure that Local USB is selected.
• Check the Windows task tray to make sure that the USB Switcher is
running (PEG-S300/HK, PEG-S300/SP or PEG-N710C/G only).
Note
The Palm Desktop for CLIÉ software supplied to this CLIÉ handheld (PEG-T615C/G or
PEG-T415/G) does not support Expense.
Using data of another Sony CLIÉ Handheld