Powerware 9315s - Manual (Page 146)

14--8 Powerware 9315 Parallel Capacity/Redundant System with PHP SSBM
164201373 Rev. A 092402
14.5.4 Final Modem Configuration
The final step in configuring the PC modem for use with the SSBM is to turn off the echo
feature of the modem. Perform the following procedure.
NOTE: The brackets ([ ]) in the following steps indicate characters that require
keying in prior to pressing [ENTER].
1. Connect the modem to the PC as described in the modem manufacturer’s manual .
2. Key in [A], [T], then press [ENTER].
3. Confirm that the modem responds with “OK” or “0” (zero).
4. Key in [A], [T], [E], [0] (zero), then press [ENTER].
5. Confirm that the modem responds with “OK” or “0” (zero).
6. Key in [A], [T], then press [ENTER].
8. Confirm that the modem responds with “OK” or “0” (zero) and that the “AT” is not
echoed back to the terminal.
9. Key in [A], [T], [&], [W], [0] (zero), then press [ENTER].
10. Confirm that the modem responds with “OK” or “0” (zero).