Powerware 9315s - Manual (Page 84)

9--8 Powerware 9315 Parallel Capacity/Redundant System with PHP SSBM
164201373 Rev. A 092402
9.6.4 System History Screen
Select History from the Events menu to display the Event History Log. The Event
History Log lists up to 400 system events in chronological order, with the most
recent event listed last. The end of the log (the most recent events) appears when
you display the screen, and you must scroll upward to view older event listings.
Figure 9---6 shows the Event History Log screen.
Statistics Graphics Setup
Events
History
Active
Uninterruptible Power System
System Normal
Events Meters
Event History Log
Event Description
03
03
03
03
03
03
03
16:41:19.3
16:41:20.1
16:41:22.4
16:41:25.5
16:41:26.8
16:41:27.8
16:41:30.4
16:41:29.1
COMMAND: Keyswitch On
STATUS: Auto Mode
COMMAND: Rectifier Commanded On
STATUS:
Inverter On
STATUS: Rectifier On
STATUS: Inverter Contactor (3) Closed
STATUS: Bypass Contactor (K4) Open
03 STATUS: Inverter Normal
Battery
48.5
Minutes
Date / Time
May
ALARM: NONE
NOTICES: NONE
15 JUL 1998 09:25:42
Figure 9---6. Event History Log Screen
A small return arrow ( ) appears in the upper right corner of the information area
of the Event History Log screen. This arrow is a reminder that you can press the
pushbutton on the Monitor Panel to toggle the scroll bar between the menu
box and the information area. When the scroll bar is in the information area, the
return arrow is in the menu box. When the scroll bar is in the menu box, the return
arrow is in the information area.
When the scroll bar is in the information area, you can press the and pushbuttons
to scroll through the Event History log.