Powerware 9315s - Manual (Page 47)

6--1 Powerware 9315 Parallel Capacity/Redundant System with PHP SSBM
164201373 Rev. A 092402
Installing a Supervisory
Contact Module
6.1 Installation Procedures
The optional Supervisory Contact Module (SCM) as shown in Figure 6---1 provides
contacts for monitoring Parallel Capacity/Redundant system status. A maximum of
two monitoring accessories (RMPs, RIMs, or SCMs) can be installed. Refer to
Chapter 4, Table 4---1 for the number of accessories permitted. See Drawing
164201373---10 in Appendix A for enclosure dimensions, side views, and knockout
patterns.
WIRES MUST
BE TWISTED
SURFACE MOUNT
(FOR HANGING)
TB2
Figure 6---1. Supervisory Contact Module
NOTE: Before installing an SCM, be sure you have prepared the SSBM according to
the instructions in Chapter 2.
6