Nortel Networks 5500 series - Manual (Page 102)

102 Configuring the domain
/cfg/domain #/server/trace
followed by:
•
host is the host name or IP address of the
target station
If a backend interface is mapped to the current
Nortel SNAS domain, the check is made
through the backend interface. To map a
backend interface to the domain, use the
/cfg/domain #/adv/interface command
(see “Configuring advanced settings” (page
109) ).
To be able to use a host name, the DNS
parameters must be configured (see
“Configuring DNS servers and settings” (page
276)
).
Configuring SSL settings
To configure SSL-specific settings for the portal server, use the following
command:
/cfg/domain #/server/ssl
The SSL Settings menu appears.
The SSL Settings menu includes the following options:
Table 8
Configuring SSL Settings
/cfg/domain #/server/ssl
followed by:
cert <certificate
index>
Specifies which server certificate the portal
server will use. You cannot specify more than
one server certificate for the server to use at
any one time.
•
certificate index is an integer
indicating the index number automatically
assigned to the certificate when you created
it
To view basic information about available
certificates, use the
/info/certs command.
For information about adding a new certificate,
see
“Installing certificates and keys” (page 299) .
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.