Maintaining and managing the system – Nortel Networks 5500 series User Manual
Page 351
351
.
Maintaining and managing the system
This chapter includes the following topics:
Topic
“Managing and maintaining the system” (page 352)
“Roadmap of maintenance and boot commands” (page 352)
“Performing maintenance” (page 353)
“Backing up or restoring the configuration” (page 356)
“Managing Nortel SNAS devices” (page 361)
“Managing software for a Nortel SNAS device” (page 363)
You can perform the following activities to manage and maintain the
system and individual Nortel SNAS devices:
•
maintenance, in order to collect information for troubleshooting and
technical support purposes (see
“Performing maintenance” (page
):
—
Dump log file or system internal status information and send it to a
file exchange server.
—
Check connectivity between the Nortel SNAS and all configured
gateways, routers, and servers.
—
Start and stop tracing to log information about a client session. You
can limit the trace to specific features, such as SSL handshake;
authentication method, user name, group, and profile; DNS
lookups; and the Nortel Health Agent check.
You can use the trace feature as a debugging tool (for example,
to find out why authentication fails). For sample CLI outputs, see
•
configuration backup and restore (see
)
•
software and device management (see
and
“Managing software for a Nortel SNAS device”
):
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100
03.01
Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.