Nortel Networks 5500 series - Manual (Page 333)

Configuring SNMP 333
The event menu includes the following options:
/cfg/sys/adm/snmp/event
followed by:
addmonitor [ <options> ] -b
<name> <OID> <op> <value>
Adds a boolean monitor and trigger as
defined in the DISMAN-EVENT-MIB.
Valid <options> are:
•
-c <comment> —adds a comment
•
-f <frequency> —the sampling
interval, in seconds. The default is 600
(10 minutes).
•
-o <OID> —additional objects to send
in the event
•
-e <EventName> —the name of a
notification event
•
-d <OID> —the delta discontinuity OID
•
-D timeTicks|timeStamp|dateAnd
Time —the delta discontinuity type
Other parameters are:
•
name —a unique name you assign to
the monitor, for identification
•
OID —the object identifier (or symbolic
name) to monitor
•
op —the operator. Valid options are:
!= (not equals), == (equals), <= (less
than or equal to), >= (greater than or
equal to), < (less than), > (greater than)
•
value —an integer indicating the value
against which the operation will be
performed
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.