Nortel Networks 5500 series - Manual (Page 167)

Configuring groups and extended profiles 167
Table 29
Configure RADIUS Attributes (cont’d.)
/cfg/doamin #/aaa/group #/radattr
followed by:
insert <position>
<vendor> <id>
<value>
Inserts a RADIUS attribute at a particular position
in the list.
move <value> <value> Moves a RADIUS attribute entry up or down the
list. The index numbers of the remaining entries
adjust accordingly.
The RADIUS Attribute menu commands shows a sample output for the
/cfg/doamin #/aaa/group <group ID> /radattr command and
commands on the Group RADIUS Attributes menu.
Figure 8
Group RADIUS Attribute menu commands
Mapping linksets to a group or profile
You can tailor the portal page for different users by mapping preconfigured
linksets to groups and extended profiles.
For more information about linksets, see “Linksets and links” (page 234) .
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.