Nortel Networks 5500 series - Manual (Page 283)

Configuring the cluster 283
/cfg/sys/adm
followed by:
telnet on|off Enables or disables Telnet access for remote
management of the system. The options are:
•
on —Telnet access is enabled. If there are
no entries in the Access List, all Telnet
connections are allowed. If there are any
entries in the Access List, only the specified
machines are allowed Telnet access.
•
off —All Telnet connections are rejected,
including connections from machines in the
Access List.
The default is off .
For more information about the Access List,
see
“Configuring the Access List” (page 273) .
ssh on|off Enables or disables SSH access for remote
management of the system. The options are:
•
on —SSH access is enabled. If there are
no entries in the Access List, all SSH
connections are allowed. If there are any
entries in the Access List, only the specified
machines are allowed SSH access.
•
off —all SSH connections are rejected,
including connections from machines in the
Access List.
The default is off .
For more information about the Access List,
see
“Configuring the Access List” (page 273) .
srsadmin Accesses the SRS Admin menu, in order
to configure the SRS rules (see
“Enabling
TunnelGuard SRS administration” (page 284) ).
sshkeys Accesses the SSH Host Keys menu, in order
to manage SSH keys used by all Nortel SNAS
hosts in the cluster in accordance with the
Single System Image (SSI) concept (see
“Configuring Nortel SNAS host SSH keys”
(page 284)
).
redist It affects the switch in all domains.
Values: yes and no
default: no
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.