Nortel Networks 5500 series - Manual (Page 398)

398 Configuration example
Making sure the MIP does not exist...ok
Trying to contact gateway...ok
Enter a timezone or ’select’ [select]: America/Los_Angeles
Enter the current date (YYYY-MM-DD) [2005-05-02]:
Enter the current time (HH:MM:SS) [19:14:52]:
Enter NTP server address (or blank to skip):
Enter DNS server address (or blank to skip): 10.20.20.2
Generate new SSH host keys (yes/no) [yes]:
This may take a few seconds...ok
Enter a password for the "admin" user:
Re-enter to confirm:
Run NSNAS quick setup wizard [yes]:
Creating default networks under /cfg/doamin #/aaa/
network
Enter NSNAS Portal Virtual IP address(pvip): 10.40.40.100
Enter NSNAS Domain name: Domain1
Enter comma separated DNS search list
(eg company.com,intranet.company.com):
Create http to https redirect server [no]:
Use restricted (teardown/restricted) action for Nortel
Health Agent failure?
[yes]:
Create default tunnel guard user [no]: yes
Using ’restricted’ action for Nortel Health Agent failure.
User name: nha
User password: nha
Creating client filter ’nha_passed’.
Creating client filter ’nha_failed’.
Creating linkset ’nha_passed’.
Creating linkset ’nha_failed’.
Creating group ’nhauser’ with secure access.
Creating extended profile, full access when nha_passed
Enter green vlan id [110]: 130
Creating extended profile, remediation access when
nha_failed
Enter yellow vlan id [120]:
Creating user ’nha’ in group ’nhauser’.
Initializing system......ok
Setup successful. Relogin to configure.
Completing initial setup
Enable SSH for secure management communications (required for
SREM):
>> Main# cfg/sys/adm/ssh on
Enable SRS administration:
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.