Nortel Networks 5500 series - Manual (Page 77)

Configuring SNMP Templates 77
Configuring SSCPLite Community
To configure SSCPLite Community, use the following command
/cfg/domain #/snmp-profile #/community
•
SNMP community is the group that devices and manages stations
running SNMP. An SNMP device or agent may belong to more
than one SNMP community. It will not respond to requests from
management stations that do not belong to one of its communities.
•
SNMP can be protected from the internet with a firewall. When
a device receives an authentication that fails, a trap is sent to a
management station.
The SSCPLite Community menu appears.
The SSCPLite Community menu includes the following options:
/cfg/domain #/snmp-profile #/community
followed by:
read Set Read Community string
Read = Public
write Set Write Community string
Write = Private
trap Set Trap Community string.
trap = trap
Configuring SNMP Templates
To configure the SNMP templates, use the following commands:
/cfg/device
The SNMP templates includes the following options:
/cfg/device
followed by
list Lists the templates being used.
show Shows the detailed information in the template.
import Imports new switch Templates to the SNAS.
This will add one more switch type in the
domain Menu.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.