Nortel Networks 5500 series - Manual (Page 165)

Configuring groups and extended profiles 165
The Extended Profile menu appears.
ATTENTION
If you ran the quick setup wizard during initial setup, two extended profiles have
been created: profile ID 1 associated with client filter
nha_failed , and profile
ID 2 associated with client filter nha_passed .
The Extended Profile menu includes the following options:
Table 28
Configuring profiles
/cfg/doamin #/aaa/group #/extend #
followed by:
filter <name> Specifies the predefined client filter that determines
whether the Nortel SNAS will apply this extended
profile to the user. If the user’s Nortel Health Agent
check result matches the filter’s criteria, the Nortel
SNAS will apply the extended profile. To view
available filters, press TAB following the
filter
command.
•
name is a string that must be unique in the
domain.
For information about configuring client filters, see
“Configuring client filters” (page 162) .
vlan <name> Specifies the VLAN to which the Nortel SNAS will
assign users with this profile.
•
name is a string that must be unique in the
domain.
linkset Accesses the Linksets menu, in order to map
preconfigured linksets to the profile (see
“Mapping
linksets to a group or profile” (page 167) ).
For information about creating and configuring the
linksets, see
“Configuring linksets” (page 251) .
del Removes the extended profile from the group.
Figure 7 "Extended Profile menu commands" (page 166) shows sample
output for the /cfg/doamin #/aaa/group <group ID> /extend
command and commands on the Extended Profile menu.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.