Nortel Networks 5500 series - Manual (Page 49)

Initial setup 49
C:\tunnelguard\tg.txt
Creating linkset ’nha_system_passed’.
Creating linkset ’nha_system_failed’.
Creating group ’nhauser’ with secure access.
Associating group ’nhasystem’ with srs rule
’srs-rule-syscred-test’.
Creating extended profile, full access when
nha_system_passed
Enter system green vlan id [115]: <VID>
Creating extended profile, remediation access when
nha_system_failed
Enter yellow vlan id [120]: <VID>
Creating system account ’nha’ in group ’nhasystem’.
Setting activation date to 2008 03 10 0:03.
Setting earliest push date to 2008 03 09 23:59.
Setting system credentials in group ’nhasystem’.
Would you like to enable the Nortel Desktop Agent?
[yes]:
Enabling Nortel Desktop Agent login on the captive
portal.
Enable secure web based configuration management
[yes]:
Enabling configuration management to https://192.168.
0.62:4443
Loading default radius dictionaries. Initializing
system......ok
Setup successful. Relogin to configure.
--End--
Settings created by the quick setup wizard
The quick setup wizard creates the following basic Nortel SNAS settings:
Step Action
1 A Nortel SNAS domain (Doamin 1). A Nortel SNAS domain
encompasses all switches, authentication servers, and
remediation servers associated with the Nortel SNAS.
2 A virtual SSL server. A portal IP address, or pVIP, is assigned to
the virtual SSL server. Clients connect to the pVIP in order to
access the portal.
3 A test certificate is installed and mapped to the Nortel SNAS
portal.
4 The authentication method is set to Local database.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.