Nortel Networks 5500 series - Manual (Page 96)

96 Configuring the domain
Table 5
Configuring the Nortel Health Agent (cont’d.)
/cfg/domain #/aaa/nha
followed by:
•
info —high-level information about
processes
•
debug —detailed information about all
processes
The default is info .
The information in the client’s Java Console
window. You can use the information to track
errors in the Nortel Health Agent SRS rules.
Using the quick Nortel Health Agent setup wizard in the CLI
To configure the settings for the SRS rule check using the Nortel Health
Agent quick setup wizard, use the following command:
/cfg/domain #/aaa/nha/quick
The Nortel Health Agent quick setup wizard is similar to the last few steps
of the Nortel SNAS domain quick setup wizard. The wizard prompts you
for the following information:
• the action to be performed if the Nortel Health Agent check fails (see
step 12 )
• whether you want to create a test user (see step 13 )
The Nortel Health Agent quick setup wizard creates a default SRS rule
(
srs-rule-test ). This rule checks for the presence of a text file on the
client’s machine ( C:\tunnelguard\tg.txt ).
The following table shows the sample output for the Nortel Health Agent
quick setup wizard.
>> Main# /cfg/domain #/aaa/nha/quick
In the event that the Nortel Health Agent checks fails on a client, the session
can be teardown, or left in restricted mode with limited access.
Which action do you want to use for Nortel Health Agent check failure?
(teardown/restricted) [restricted]:
Do you want to create a test user for system authentication? (yes/no) [yes]:
Do you want to create a test local user? (yes/no) [yes]:
User policy configuration...
Creating Client Filter 1
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.