Nortel Networks 5500 series - Manual (Page 401)

Steps 401
Trying to retrieve fingerprint...failed.
Error: "Failed to retrieve host key"
Do you want to add ssh key? (yes/no) [no]:
Red vlan id of Switch: 210
Creating Switch 2
Use apply to activate the new Switch.
>> doamin ##
Export the Nortel SNAS public SSH key to a TFTP server, for manual
retrieval by the Ethernet Routing Switch 5500:
>> Main# cfg/doamin #/sshkey/export tftp 10.20.20.20
sac_key.1.pub
Import the public SSH key from the switch:
>> Main# cfg/doamin #/switch 2/sshkey/import
Mapping the VLANs
This example assumes that the VLANs defined on the Ethernet Routing
Switch 8300(Switch 1) will always be used exclusively by Switch 1,
whereas the VLAN IDs for the VLANs defined on the Ethernet Routing
Switch 5510 (Switch 2) may be used by other edge switches added to the
domain in future. Therefore, the VLAN mappings for Switch 1 are made
at the switch-level command, while the VLAN mappings for Switch 2 are
made at the domain level.
>> Main# cfg/doamin #/switch 1/vlan/add yellow 120
>> Switch Vlan# add green 130
>> Switch Vlan# ../../vlan/add yellow 220
>> Domain Vlan# add green 230
>> Domain Vlan# apply
Changes applied successfully.
Enabling the network access devices
>> Main# cfg/doamin #/switch 1/ena
>> Switch 1# ../switch 2/ena
>> Switch 2# apply
Changes applied successfully.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.