Nortel Networks 5500 series - Manual (Page 353)

Managing and maintaining the system 353
Command Parameter
/cfg/gtcfg <protocol> <host name or
IP address of server> <filename on
server>
/cfg/dump
/boot software
halt
reboot
delete
/boot/software cur
activate <version>
download <protocol> <server>
<filename>
del
Performing maintenance
To check the applied configuration and to download log file and system
status information for technical support purposes, use the following
command:
/maint
The Maintenance menu appears.
The Maintenance menu includes the following options:
/maint
followed by:
logs<in-memory> Displays the logging system menu.
•
start-log —starts logging messages into an
internal buffer.
•
stop-log —stops logging messages into an
internal buffer.
•
displaylog —set to display last n messages,
where n is order of 10.
•
clearlog —clears the log messages.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.