Nortel Networks 5500 series - Manual (Page 84)

84 Configuring the domain
Figure 4
Creating a domain
Using the Nortel SNAS domain quick setup wizard in the CLI
To create a domain using the Nortel SNAS quick setup wizard, use the
following command:
/cfg/quick
The NSNAS quick setup wizard is similar to the quick setup wizard
available during initial setup.
Depending on the options you select in connection with certificates and
creating a test user, the two wizards also create similar default settings
(see
“Settings created by the quick setup wizard” (page 49) ).
You can later modify all settings created by the domain quick setup wizard
(see
“Configuring domain parameters” (page 89) ).
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.