Nortel Networks 5500 series - Manual (Page 321)

Managing private keys and certificates 321
To generate a test certificate, perform the following steps:
Step Action
1 Access the Certificate menu by using the /cfg/cert <cert
id> command, where <cert id> is an unused certificate
number.
2 Generate the test certificate. Enter the following command:
/cfg/cert #/test
You are prompted to enter the following parameters. The
combined length of the parameters cannot exceed 225 bytes
•
country name (2-letter code)
•
state or province name
•
locality name
•
organization name
•
organizational unit name
•
common name
•
e-mail address
• subject alternative name
• validity period—the default is 365 days
•
key size—the default is 1024 bits
For more information about the parameters, see Table 54 "CSR
information" (page 306) .
3 Apply the changes.
--End--
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.