Nortel Networks 5500 series - Manual (Page 444)

444 CLI reference
Command Parameters/Submenus Purpose
/cfg/sys/adm/hardenpass length <integer>
lowercase <integer>
uppercase <integer>
digits <integer>
others <integer>
retry <integer>
ena [<true|false>]
dis [<true|false>]
Configure the Nortel
SNAS to support
harden password.
/cfg/sys/adm/http port <integer>
ena [<true|false>]
dis [<true|false>]
Configure the Nortel
SNAS to support
http settings.
/cfg/sys/adm/https port <integer>
ena [<true|false>]
dis [<true|false>]
Configure the Nortel
SNAS to support
https settings.
/cfg/sys/adm/snmp Configure SNMP
for the Nortel SNAS
network.
/cfg/sys/adm/snmp ena [<true|false>]
dis [<true|false>]
versions <v1|v2c|v3>
snmpv2-mib
community
users <id>
target <nr>
event
Configure SNMP
management of
the Nortel SNAS
cluster.
/cfg/sys/adm/snmp/community read <name>
write <name>
trap <name>
Configure the
community
aspects of SNMP
monitoring.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.